What should I do to maintain my Montabert rock drills and spare parts

What should be done for the maintenance of Montabert rock drills and accessories? This article gives an overview of what should be done for the maintenance and upkeep of rock drills.

1. Before using the new machine, disassemble and clean the internal parts and remove the anti-rust oil. Reassembly, the mating surface should be coated with lubricant. Blow out any dirt in the air supply pipe and joints with pressurized air to prevent it from entering the machine and wearing out the Montabert rock drill accessories and parts. 2.

2. Check that the shape and length of the drill tail, the size, and the depth of the water pinhole meet the requirements and that the central hole is clear. If the braze tail is “stacked” or cracked, replace it according to the situation.

3. Give wind or water to the water pin of the rock drill to see if it is clear. Do not dry-hole or remove the water needle to avoid damage to the valve sleeve.

4. Check carefully whether the connections are tight, whether the air inlet bend is secure, and whether the operating handles are reliable and flexible, so as to avoid loosening the machine and injuring people, or affecting the normal operation of the machine.

Before running the rock drill, the oiler should be filled with lubricant and the oil quantity should be adjusted. The oiler should be filled with oil once every hour during work, and should not be operated without oil. For floor-mounted oilers, attention must be paid to whether the installation direction is correct.

Montabert

After drilling, remove the water pipe and run it lightly, blowing out any remaining water droplets inside the machine to avoid rusting of the internal parts of the Montabert rock drills.

Montabert Rock Drill Accessories – Montabert Accessories – Montabert Rock Drill Accessories Price

7. to set up a person responsible for overhaul, after work to carefully check whether each part is damaged, failure should be repaired in a timely manner.

8. When dealing with breakdowns or overhauling Montabert rock drill parts underground, this must not be done at the digging face, but in the underground repair department where conditions are better.

9. When used machines are to be stored for a long time, they should be dismantled and cleaned, oiled, and sealed.

We sell spare parts for Atlas Copco, Epiroc, Sandvik, TAFI, Montabert, Furukawa, and other brands. Please send us the part number, a picture of the equipment, or the machine nameplate. We will check the price and delivery date for you. Our engineers have over 10 years of experience in the drilling rig and rock drill spare parts industry. If you have any questions, please get in touch with us .